- Bad to the Bone
- Hot Chicks
- OH & S
- Printed Stubbys & Mugs
- Stick Family
- Tin Signs
- XXXAdult -18+
- About Us
- Contact Us
Decal Application Instructions
- Clean the area where the decals will be applied with a soft cloth dampened with alcohol. This will remove any wax, oil or dust particles that will prevent the decal from sticking. After wiping the area with alcohol it is best to wipe the surface with a cloth dampened with clean water and let dry.
- Turn the sticker/decal upside down and carefully peel the paper backing off on a 45 degree angle, the sticker now has the sticky side exposed but held together by the application tape, holding the application tape position and stick the top of one side holding the other side up away from the surface, roll the sticker onto the surface, DO NOT stretch as this will crease the sticker, rub the entire surface beginning at the top or side that is on the surface and rub firmly from one side to the other using your fingertips/soft cloth or the sharp edge of a credit card.
- Once on the surface, remove the application tape by pulling gently in a downward position. If a part of the decal starts to come up away from the surface rub it back down while the tape is still on, then again continue to remove the tape. Note: The decals will not adhere to a surface that has been waxed. Remove all wax and residue with Windex or denatured alcohol before application. After the decals have been applied, the surface can be waxed over. The wax will not damage the decal, but will prevent it from sticking. By default the decals are cut to be applied to the outside. If you want the decals to be cut to be applied to the inside please select the "Reversed" Box when adding the item to your cart or from within the Shopping Cart and you will receive the decals reverse cut to be applied to the inside. We also welcome any size or design preferences that you may have. If you get air bubbles in the decal take a pin or needle and puncture the bottom of the bubble to release the air, by rubbing gently towards the pin hole.
Large Decals Application
For large decal application, hold the decal in position and stick the top or one side in place. Then using the sharp edge of a credit card working your way from top to bottom with firm pressure to prevent any air bubbles. To apply extra large decals we recommend getting someone to hold the decal in position while the other person rubs it in place.
Used mainly on large applications, using a 500ml spray bottle, add approx. 6 drops of dishwashing liquid to 500ml of water, shake to mix, spray both the surface that you want to stick to, and after removing the backing paper from the sticker give the sticky side a light spray, this will allow the sticker to slide while being applied, position and rub out any bubbles as outlined above (you need to hold the sticker in place as when you rub it will move), although this allows for easier application it also takes longer to "stick" allow overnight drying before using
If you are uncomfortable with the process you may consider professional installation by your local sign writer.